CR Copper Brass coil sheet Slitting Line Machine after cold rolling 0.2 -2.0 X 600

CR Copper Brass coil sheet Slitting Line Machine after cold rolling 0.2 -2.0 X 600

This copper slitting line is used for copper coils edge trimming and recoiling, or slitting and recoiling, you can cut strip(s) in midway to realize big diameter coil(s) to become smaller diameters, but the recoiled coils inner diameter keeps the same. If you want to have different inner diameter of recoiled coils, the recoiler should have more than one mandrels available.

Input and Output:

Copper coil thickness and width:2.0-0.2×650

Copper coil weight:5000kg

Slitting speed:100m/min

Uncoiling diameter: 400mm, 508mm

Recoiling diameter: 300mm, 400mm, 508mm

Composition

Copper strip slitting machine is important equipment in copper sheet processing industry: when the copper sheet thickness reduces to edge cracks, must stop the rolling process, come to the slitter to do edge trimming and then go back to further rolling. After the cold rolling and annealing, also need slitting to certain widths of strips for afterward application of baby strips.

We are expert of slitting lines manufacturer, the copper strips widths usually not more than 850mm, the 600mm, 500mm, 400mm, 300mm are often seen, so the slitter machine capacity follow these parameters, the copper slitting machine is precision mini type, our high precision slitting line is able to slit copper sheet, aluminum sheet, stainless steel, electric steel(CRGO or CRNGO) and carbon steel coils. Each slitter is customized, we would like to listen to and satisfy our customers, we always go with market.